Sunday, February 20, 2022
- Worked on wiring plan
- Secured top stringer
- Secured left and right top side stringers
- Secured left and right bottom side stringers
- Secured bottom stringers
Top and Right sides gets a rivet in the front, Bottom and Left sides in the back
Each C bracket gets two rivets. If I center them, however, the rivets will hit in the middle. Thus, they are offset.
Used a spring punch to make a little hole to capture the drill bit.
Without this, the bit will wander around the metal, where it will wind up no one knows :-/
Deburring is important
You don't want any burs that work themselves loose in time, then make your rivet loose when it breaks free.
Using the punch to mark a hole